Electrical- LED lights

Hello! If anyone can help I appreciate it. I connected my solar setup and the charge controller says the panel is charging the battery and I can turn the load on and off, so I turn it on, but my lights don’t work. 4 LED lights and two dimmers are the only thing connected to the fuse box. Where should I start in troubleshooting here.

Check power at the light connection. 12/24?

I’m not sure why you would have your lights hooked up to the load and not simply to the batteries. I have nothing connected to my load and have never turned it on.

That is only going to work if they are actively in the sun and then you have a switch to have them pull from the battery when it’s dark. It sounds like your setup wiring setup is either incorrect or you’ve over complicated things.